Description Of Commands; Programme Selection Knob; Temperature; Spin Regulation - sangiorgio F814CD Manual De Operación Y Mantenimiento

DEsCrIpTION OF COMMANDs

1. prOGrAMME sELECTION KNOb

The knob is used to select a desired programme
and to turn the machine OFF. It can be rotated
in clockwise and counterclockwise for a fast
and easy selection of programme.
2. TEMpErATUrE rEGULATING KNOb
This button allows for the adjustment of the
temperature. To change setting push the tem-
perature button (at impulse) until the desired
temperature is obtained.

3. spIN rEGULATION

This button is used for spin regulation. To vary
the setting, press repeatedly the corresponding
button until the desired value is reached on the
digit display.

4. DELAY sTArT

This button permits the programming of the end
of a wash cycle activating delay start. The lag-
ging time to the end of the cycle is expressed in
hours (h) and displayed on the interface.
On Display model: from 0 to 24h
On LED model: from 0 to 9h

5. sTAIN LEvEL rEGULATION

Only on the F4 display model
This button is used to maximise washing perfor-
mance adapting it to the intensity of dirtiness.
Light
Moderate
Heavy
6. OpTIONs
This button consents navigating through the
washing options. Press repeatedly the button
to visualised the desired option. The selected
option will start to blink and can be confirmed
by pressing the "Option confirm" button 7. Its
activation is marked by a steady lit icon.
16
39601005005 - Mutilingua Pittogrammi.indb 16
7. Option confirmation
This key is used for confirmation of selected op-
tions.
8. sTArT/pAUsE
Press the Start/Pause button to start washing
(with LED on) or in pause status (with blinking
LED).
06/07/2018 17.44.03