Choosing The Right Cookware; Existing Pots And Pans - universalblue UBE2412-21 Manual De Instrucciones

4. CHOOSING THE RIGHT COOKWARE

IMPORTANT: The cooking zones will not switch on if pots are not the
right size. Only use pots bearing the symbol "INDUCTION SYSTEM"
(Figure below). Place the pot on the required cooking zone before
switching the hob on

EXISTING POTS AND PANS

Use a magnet to check if the pot is suitable for the induction hob:
pots and pans are unsuitable if not magnetically detectable.

Make sure pots have a smooth bottom, otherwise they could
scratch the hob. Check dishes.

Never place hot pots or pans on the surface of the hob's control
panel. This could result in damage.

The bottom diameter of pots or pans should be at least 10cm.
.
33