Using The Boost - universalblue UINDU6500-18 Manual De Instrucciones

4. Beware of hot surfaces. H will show which cooking zone is hot to touch. It will disappear when
the surface has cooled down to a safe temperature. It can also be used as an energy saving
function if you want to heat further pans, use the hotplate that is still hot.

4.3. USING THE BOOST

Boost is the function that one zone rising to a larger power in one second and lasting for 5
minutes. Thus you can get a more powerful and faster cooking.
Using the Boost to get larger power
1. Touch the heating zone selection button that you wish to boost, an indicator next to the key will
flash.
2. Touch the Boost button, the heating zone will begin to work at Boost mode. The power display
will show "P" to indicate that the zone is boosting.
3. The Boost power will last for 5 minutes and then the zone will go back to the power stage which
was set before boost.
4. If you want to cancel Boost, touch the heating zone selection button first, an indicator next to the
key will flash. And then touch the Boost button. The heating zone will go back to the power stage
which was set before boost.
30