Ferroli EGEA 200 HT Manual De Uso, Instalación Y Mantenimiento página 89

EGEA
200 HT - 260 HT
Positions allowed for transport and handling
ATTENTION! During the product handling and
installation phases the upper part must not be
stressed in any way, as it is not structural.
ATTENTION! Horizontal transport is allowed only
for the last km according to that indicated (see "Po-
sitions not allowed for transport and handling"),
making sure supports are positioned in such a way
at the bottom of the boiler so as not to stress the
upper part, as it is not structural. During horizontal
transport the display must face upwards.
fig. 1
cod. 3541T590 - Rev. 05 - 12/2021
Position allowed only for the last km
Positions not allowed for transport and handling
fig. 2
EN
89