Product Description And Specifications; Intended Use; Product Features - Bosch PWR 180 CE Manual Original

24 | English
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
To connect the vacuum hose to the
handpiece, dust container or extraction
adapter, you have to insert the vacuum
hose into the socket of the respective
connecting piece until the two snap-fas-
teners engage ("CLOSE").
To disconnect it, press the snap-fasten-
ers inwards and turn the vacuum hose
slightly ("OPEN"). Then pull the compo-
nents apart.
"EasyAdapt"
The extraction adapter enables various
brands of vacuum cleaner to be connect-
ed to the vacuum hose.
"Bagless Filter Technology"
The bagless filter system removes the
need to use dust bags.
"EasyClean"
To quickly clean the filter element, turn
the filter lid at least three times.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The power tool is intended for dry sanding of walls and ceil-
ings in indoor and outdoor areas, for sanding filled drywall
surfaces, for removing paint, wallpaper and adhesive resi-
dues, for dry surface-sanding of metal, stone and wood, for
dry sanding-down of coatings, for dry sanding and smoothing
of concrete, plaster and screed, for perforating wallpaper on
hard surfaces, for removing tile adhesive and dry carpet ad-
hesive residues from hard surfaces (hard plaster, concrete),
for smoothing formwork joints and roughing concrete surfac-
es.
The power tool must be used together with the matching dust
container or a dust class M vacuum cleaner.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
2 609 007 769 | (2.6.14)
Handpiece of the wall processing system
1 Handpiece
2 Direction-of-rotation arrow for sander spindle
3 Spindle lock button
4 Auxiliary handle (insulated gripping surface)
5 On/Off switch
6 Handle (insulated gripping surface)
7 Thumbwheel for speed preselection
8 Vacuum connection
9 Wing bolt for adjustment of auxiliary handle
10 Guard and extraction hood
11 Hood segment
12 Brush collar
13 Fan wheel
14 Sander spindle
15 Mounting flange
16 Clamping nut
17 Two-pin spanner
18 Hook wrench
Extraction
19 Vacuum hose
20 Snap-fastener
21 Velcro strap
22 Extraction adapter
Dust container*
23 Dust container
24 Filter lid
25 Carrying handle with resting recess for handpiece
26 Fastening clips of the filter lid
27 Hose connection piece
28 Rear wheel
29 Holder for vacuum hose
30 Filter element (filter system for fine dust)
31 Opening
Application tools*
32 Wire brush
33 Perforator
34 Carbide cup wheel
35 Diamond cup wheel
36 Sanding plate
37 Sanding sheet
38 Backing pad
39 Foam disc
40 Backing pad for fibre sanding disc
41 Fibre sanding disc
42 Round nut
43 Brush segment (plastic, brass, steel)
44 Spacer disc
*Some accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools