Control Panel Description - Chauvet DJ COLORBANDPIXMUSB Guía De Referencia Rápida

To Begin
Unpack your COLORband PiX-M USB V2 and make sure you have received all parts in good condition. If the box or
contents appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
It is possible to power link up to 5 COLORband PiX-M USB V2 products on 120 V or up to 9 products on 230 V. Never
exceed this number. Power-linking cords can be purchased separately.
Fuse Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse-holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Safety Cable
(such as CH-05 from
Chauvet)

Control Panel Description

Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
COLORband PiX-M USB V2 QRG Rev. 3
QUICK REFERENCE GUIDE
Safety Notes.
EN
Mounting Clamp
(such as CLP-15 from Chauvet)
Mounting Bracket
2