Use only the temperature probe recommended for
this oven.
Do not use a steam cleaner.
IMPORTANT: The oven produces hot air or steam
during the cooking process. Be very careful when
opening the door.
The user must not replace the appliance's power
cord. It should only be replaced by a qualified
electrician.
Never cover the oven with aluminum foil. It could
block the slots and prevent regular heat exchanges,
damaging the enameled surface.
Before you start using the oven to cook, you must
remove the protective film from the oven door and
heat the empty oven to the maximum temperature
for about 45 minutes (this will remove the odors and
fumes created by manufacturing waste). After this,
the oven should be thoroughly cleaned with soapy
water and rinsed well, but do not use too much
water as it could penetrate and damage the internal
components.
Always call an authorized Technical Assistance
Center and insist on original spare parts if repairs
are required. Repairs made by incompetent people
can cause damage.
36