universalblue UBH2301-21 Manual De Instrucciones página 46

Do not let the power cord touch the hot surfaces when it is
placed and do not attach it to the oven lid.
Contact the nearest authorized service center if the power
cord is damaged. Make sure that the authorized service has
the opportunity with a new cable with plastic insulation of the
same size and that can withstand the electric current needed
by the oven.
A bipolar switch with at least 3 mm must be installed
between the points of contact between the device and the
electric cable and suitable for transporting the desired load in
accordance with the laws in force.
If the device is to be connected directly to the electric wiring.
Ground wire must not be cut be double pole switch.
 It is not advised to use adapters, multi plugs or extension
cords. If absolutely necessary, adapters or extension cords in
line with safety laws can be used. However, never go beyond
the maximum current capacity and maximum power stated
for the adapter.
 Test heating elements for 3 minutes after the connections
are done.
 Electricity safety of the device is guaranteed only if
connected to suitable source correctly with grounding in
accordance with the rules. Our company cannot be held
responsible for the damages to people, animals or properties
due to the failure to ground the device properly.
46