Working With The Unit; Before Starting Work - Steinberg Systems SBS-BT-918 Manual De Instrucciones

The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Place the
device in a way that ensures good air circulation.
Keep the device away from any hot surfaces, flammable materials and
electromagnetic fields. Always operate the unit on a level, stable, clean, fireproof
and dry surface and out of the reach of children and persons of impaired mental,
sensory and intellectual functions.

3.3. Working with the unit

3.3.1.

Before starting work

Before starting work, check the insulation and the general condition of the
terminals. Using damaged terminals can lead to serious accidents!
3.3.2. Cold engine mode
The device can perform measurements with the engine off in two modes: a quick
test "QUICK TEST", which uses the battery capacity, and an accurate test
"ACCURATE TEST", which uses the inrush current value.
The "Accurate test" mode should only be used if the inrush current value is
shown on the plate on the battery!
3.3.2.1. "Quick test" - quick testing:
1. Connect the red clamp terminal to the positive terminal of the battery and the
black clamp terminal to the negative terminal.
2. Use the arrows to select item number 1 "BATT CAPACITY".