When the [Return] is pressed the program will be
converted and will automatically substitute the
existing chain program in the group, terminating
the procedure.
9.7.5 COMPUTER CONFIGURATION
The conFigure option that is read when enabling
the Chain, Prog. subf., patterN and cOdify func-
tions in the MAIN MENU, allows the user to give
an address to the software and to identify the
chains, the subfiles, the patterns in the computer
and the coded program transmission via cable to
the machine. This option is usually already con-
figured with the standard codes. You are advised
not to change these codes so as to avoid poor
operation of the program. You are advised to en-
sure you understand each part of the conFigure
option for the various types of function.
Chain In the Chain function, the conFigurat. op-
tion has six different selections (see Fig. 53).
!
THE FILE ALREADY EXISTS !
DO YOU WANT TO OVERWRITE ?
RETURN => confirm
!
¡ EL ARCHIVO YA EXISTE !
¿DESEA SOBREESCRIBIRLO ?
RETURN => convalidar
SANTONI S.p.A.
341
ESC => quit
ESC =>renunciar
En el momento en que se pulsa la tecla [Return] el
programa
será
convertido
substituirá al programa cadena existente en el grupo,
terminando el procedimiento.
9.7.5 CONFIGURACIÓN DEL ORDENADOR
La opción conFigurar que se lee habilitando en el
MENÚ PRINCIPAL las funciones Cadena, Prestilo,
dibujo[N] y cOdificados, sirve al usuario, para dar
una dirección al software, para localizar en el
ordenador, las cadenas, los prestilos, los dibujos, y la
transmisión del programa codificado por cable a la
máquina.
Esta
opción
predispuesta
con
códigos
contenidos en la instalación del software de la
máquina. Por ello aconsejamos al usuario no modificar
estos códigos para evitar un mal funcionamiento del
programa mismo. Por lo tanto continuando en este
párrafo se aconseja al usuario que tenga mucho
cuidado para comprender bien cada parte que la
opción conFigurar posee, según el tipo de función al
cual está acoplada.
Cadena En la función Cadena, la opción conFigurar,
posee seis selecciones diferentes (figura 53).
Fig. 52
y
automáticamente
normalmente
está
ya
estándar
que
están
REVISION 1.1