Trust SWITCH-IN START-LINE AGC-3500 Manual Del Usuario página 4

EN
AGC-3500 OUTDOOR SOCKET SWITCH
1. Place socket switch
A
Plug the switch into an electrical outlet.
B
Pairing mode of the switch will be activated.
The pairing mode lasts 6 seconds.
2. Pair the switch with a transmitter
A
Send an ON signal within 6 seconds with
a Trust Smart Home transmitter during pairing
mode.
B
The switch will make a clicking sound 4x
to confirm that the pairing was successful.
The switch can store up to 32 different
transmitters in its memory. The paired
transmitters will be retained if the switch is
moved to another outlet.
3. Control the socket switch
A Connect the device you want to control to
the socket switch and press the ON button
with the assigned channel on the paired
transmitter to turn the switch / device ON.
Do not exceed the maximum load: 3500W.
B
Press the OFF button with the assigned
channel on the paired transmitter to turn the
switch / device OFF.
Optional: Unpair transmitter from socket switch
A Disconnect all connected devices and remove
the socket switch from the wall socket. After
6 seconds, put the socket switch back in the
wall socket.
4
B
The pairing mode of the socket switch will be
activated for 6 seconds.
C
Send an OFF signal with a paired channel
from the Trust Smart Home transmitter within
6 seconds to unpair it. The switch will make
a clicking sound 4x to confirm it is unpaired.
Optional: Clear socket switch memory
A
Disconnect all connected devices and remove
the socket switch from the wall socket. After
6 seconds, put the socket switch back in the
wall socket.
B
The pairing mode of the socket switch will be
activated for 6 seconds.
C Send an GROUP OFF signal with the Trust
Smart Home transmitter within 6 seconds
to clear the memory. The switch will make
a clicking sound 4x to confirm the memory
is cleared.