Filter Cage - GreenWorks BVU24211 Manual Del Propietário

ASSEMBLY
W A R N I N G
If any parts are damaged or missing, do not operate this product until the parts are replaced. Use
of this product with damaged or missing parts could result in serious personal injury.
W A R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this
vacuum cleaner. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
W A R N I N G
Do not use the cartridge filter for liquid vacuuming. For wet vacuum cleaning, install the supplied
foam filter.
FILTER REMOVAL AND INSTALLATION (See Figure 2)
NOTE: To avoid damage to the blower wheel and motor, always reinstall the filter before using the vac.
Cartridge filter Removal:
1. Lift the lower latch then pull down the upper latch to disconnect the top cover assembly
from bottom tank.
UPPER LATCH
LOWER LATCH
2. Turn the top cover assembly upside down while holding the cartridge filter.
3. Turn the cartridge filter counterclockwise. This action will cause the filter to release from
the filter cage. Slide filter off cage.
COLLECTION TANK

FILTER CAGE

11
TOP COVER
ASSEMBLY
Fig. 2.1
Fig. 2.2