Extension Cord Use - brondell SWASH DR801 Manual Del Propietário

SAFETY INFORMATION
(IMPORTANT SAFEGUARDS)
OPTIONAL GROUNDING INSTRUCTIONS
This product is for use on a nominal 120V circuit, and has a grounding
plug that looks like the plug illustrated in sketch A in Figure 1.
A temporary adapter, which looks like the adapter illustrated in
sketches B and C, may be used to connect this plug to a 2-pole
receptacle as shown in sketch B if a properly grounded outlet is
not available.
The temporary adapter should be used only until a properly grounded
outlet (sketch A) can be installed by a qualified electrician.
Attach the grounding wire to the grounding screw on the product as
shown in sketch D of Figure 2. Attach the other end of the grounding
wire to the grounding screw located on the temporary outlet.
Do not connect the grounding wire to a
DANGER
non-grounded outlet.

EXTENSION CORD USE

If it is necessary to use an extension cord, only use those rated
for a minimum of 15 amps with a three-wire extension cord with a
three-blade grounding plug. Only plug into a three-slot grounded
GFCI receptacle that will accept the plug of the product. Replace or
repair any damaged cords immediately.
SAVE THESE INSTRUCTIONS
A
B
D
C
Figure 1
Figure 2
5