FONRI NAS-AB02W0 Guia Del Usuario página 5

Device Status
Pairing with Wi-Fi
AP mode
Triggered
Closed
Reset
Factory Reset (Reset)
Press and hold the "Reset" button for 6 seconds
until the light starts to flash fast. Then the device
will go into the Wi-Fi pairing mode.
Press and hold the "Reset" button for another 6
seconds until the light starts to flash slowly. Then
the device will go into the AP pairing mode.
Warning: The device has a memory function. It will return to
its original state after turning it on and off. Users can delete
the records by clicking the reset button on the application.
LED Status
The light flashes quickly
The light flashes slowly
The light turns on
The light turns off
The light turns on for 4 seconds and 2
seconds after it turns off, the device
goes into setup mode.
5