Technical Specification; Assembly; General Information - Busch+Müller IQ-X E Instrucciones De Uso

5. Technical specification

Headlight dimensions: Height: 55 mm | Length: 46 mm | Width: 54 mm | 120 g
Brightness: 150 Lux
Nominal voltage: 5 - 48 V DC
Precondition: at least 7.5 W nominal capacity at the light connection of the drive system
NOTICE
Never connect to an AC voltage source (e.g. dynamo).
NOTICE
If your e-bike has a dynamo to power the lighting system, you will need a standard dynamo
headlight.

6. Assembly

6.1. General information

!
Make sure your headlight is not covered under any circumstances. Take care that the headlight has
been mounted and aligned as prescribed. For headlights with a separate reflector, make sure that the
make sure that the reflector
In Germany, the prescribed mounting height for headlights
400 and 1,200 mm. For details, consult your national Road Traffic Regulations or contact a local bicycle
specialist retailer. Always make sure the headlight is mounted and aligned in a way to ensure that
oncoming traffic is not blinded.
20
3 is aligned perpendicular to the road surface.
and reflectors ranges between about
1 3