Sauder Steel River Serie Instrucciones De Montaje página 25

Step 21
Fasten the LONG BRACES (N) to the LEGS (A and B) and UPPER
å
SHELVES (G). Use eight BLACK 1/2" PAN HEAD SCREWS (19).
NOTE: Start all the SCREWS a few turns before tightening them.
å
Fasten the LONG BRACES (N) together. Use the MACHINE
å
SCREW/NUT SET (12) in the center holes in the LONG BRACES.
NOTE: If the center holes in the LONG BRACES (N) do not line
å
up, loosen the SCREWS in the LEGS and SHELVES and then
retighten once the LONG BRACES are fastened together.
NOTE: Tighten the NUT using the SMALL TOOL (13).
å
423975
G
N
G
MACHINE
SCREW
N
B
www.sauder.com
Almost time to
celebrate! With a nap.
A
NUT
13
BLACK 1/2" PAN HEAD SCREW
(8 used in this step)
19
Page 25