Sauder Steel River Serie Instrucciones De Montaje página 5

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Fasten four METAL BRACKETS (5) to the ENDS (C and D).
å
Use four BLACK 1/2" PAN HEAD SCREWS (19).
NOTE: The METAL BRACKETS should even with the long
å
edges of the ENDS. Position them exactly as shown.
Push four HIDDEN CAMS (1) into the ENDS (C and D).
å
BLACK 1/2" PAN HEAD SCREW
(4 used in this step)
423975
19
5
D
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
www.sauder.com
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
C
1
Arrow
Hole
Arrow
(4 used)
Page 5