Sauder Steel River Serie Instrucciones De Montaje página 26

Step 22
Use the FURNITURE TIPPING RESTRAINT KIT (98) for added stability. Fasten the strap to the bottom surface of the TOP (E)
å
using the short screw as shown.
Place your unit in its fi nal location against a wall. Locate the center of a stud in your wall near your unit and mark it
å
with a pencil. Next, drill a 1/8" hole on the mark and into the stud in your wall.
Fasten the unit to the wall. Use the long screw through the other end of the strap and into the 1/8" hole.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
Drill this hole into
a stud in your wall.
Page 26
Use the short screw through the hole in
the strap and into the bottom surface
of the TOP (E).
98
E
www.sauder.com
No load
30 lbs.
30 lbs.
30 lbs.
25 lbs.
30 lbs.
423975