SWM SIX DAYS 2003 Manual Del Usuario página 18

SIX DAYS
No. System or component
32 Front Oxygen Sensor
33
34 Oxygen Sensor
35
36 1st cylinder
37 Oxygen Sensor Heater
38
39 System Voltage
40
41 Vehicle Speed Sensor
42 Secondary
compensating valve
43
44 Park Neutral Switch Diag
45 Tachometer
46
18 -
EN
Error code Error description
P2195 Front oxygen sensor PE too thin
P2196 Front oxygen sensor too thick when fuel cutoff for
deceleration
P0132 O2S 1 Circuit High Voltage
P0131 O2S 1 Circuit Low Voltage
P0301 1st cylinder not working
P0031 O2S Heater Circuit Low Voltage/Open Circuit
P0032 O2S Heater Circuit High Voltage
P0563 System Voltage High
P0562 System Voltage Low
P0500 VSS No Signal
air P2257 Secondary air compensating valve open circuit/short
circuit low voltage
P2258 Secondary air compensating valve short circuit high
voltage
P0850 Park Neutral Switch Error
P1693 Tachometer Circuit Low Voltage
P1694 Tachometer Circuit High Voltage
Driver behavior
Check if the front oxygen sensor is connected effectively.
If the error still persists ask for assistance.
Check if the voltage regulator is connected effectively.
Reset. If the error still persists ask for assistance.
Check if the vehicle speed sensor is connected
effectively. Use multimeter to check the voltage
(12V- 14.7V normally). If the error still persists ask for
assistance.
Check if the secondary air compensating valve is
connected effectively. If the error still persists ask for
assistance.
Check if the park neutral switch is connected effectively.
If the error still persists ask for assistance.
Check if the crankshaft position sensor is connected
effectively. If the error still persists ask for assistance.