Warming Rack - Dyna-Glo DGF481CRN Manual De Instrucciones

Care and Maintenance - cont.
Burner Assembly
Removing The Burner Assembly
1. Make sure all control knobs are in the OFF
position, gas supply valve is closed, and the
gas hose is disconnected from the gas supply.
2. Open lid and remove warming rack, cooking
3. Remove hinge pin as shown in Figure 1.
4. Slide main burners and SearPLUS™ burner out
5. Detach ignition wire from electrode in Figure 2.
Figure 1
Figure 2
23
Cooking

Warming Rack

Grates
Heat Tents
Assembly