Tena Flex - Tena SmartCare Change Indicator Instrucciones De Uso

en

TENA Flex

The TENA SmartCare Change Indicator™ should always be attached when the
incontinence product is folded and before it has been applied to the user.
NOTE
Ensure the Change Indicator is straight. Smooth any
sensor strip wrinkles, then press firmly to ensure the
Change Indicator has full contact with the TENA
absorbent product.
TENA Flex
Find the front
TENA Flex
Find the front based on the
application of the product.
4
Place tightly
18
TENA Flex
1
Every time you change an
incontinence product, press both
buttons simultaneously for two
seconds to reset the transmitter
to register the change in the app.
2
Keep folded
TENA Flex
5
3
Align with the top
of the thicker
absorbent area
6
Apply the absorbent product
with the Change Indicator to
your loved one.
Apply TENA product
on the resident