Tena SmartCare Change Indicator Instrucciones De Uso página 2

en
This guide is intended for family caregivers using the TENA SmartCare
Change Indicator™ in a home environment.
The TENA SmartCare Change Indicator is a digital health technology
solution that helps family caregivers decide when to change absorbent
products without the need for frequent manual checks.
The Change Indicator is attached to the outside of the absorbent product
and tracks the urine saturation levels within. Family caregivers then
receive information about the different saturation levels on their
smartphones via the TENA SmartCare Family Care app. This information is
then used to decide whether the absorbent product needs to be changed
or not. The TENA SmartCare Change Indicator system tracks urine
saturation, but does not detect faecal episodes.
TENA SmartCare Change Indicator is a system consisting of:
• An app named TENA SmartCare Family Care that can be installed
on one or more smartphones used in a family.
• A reusable Change Indicator that consists of two parts: a sensor strip
and a transmitter.
• A gateway that relays data from the Change Indicator to a secured server.
In this guide, you will find instructions for how to use:
The TENA SmartCare Change Indicator system including TENA SmartCare
transmitter, TENA SmartCare gateway, TENA SmartCare sensor strip and
TENA SmartCare Family Care app.
The TENA SmartCare Change Indicator system is designed to be intuitive,
with family caregivers in mind. It does not require special training.
Symbols used in this guide
2
Information
WARNING Care shall be taken to ensure safety and efficiency.
Failure to do so could cause damage to equipment or lead to
the receipt of incorrect data.
NOTE Important information or advice/tips.
CHECK Important information for the system to function.