Makita DCJ205 Manual De Instrucciones página 9

Battery pocket
The battery can be stored in the battery pocket.
Connect the power cable jack pulled out of the battery
pocket to the plug of the battery adapter cable. Then
put the battery into the battery pocket and fasten the
fastener.
NOTE: The battery holder(with battery cartridge) can
not be stored in the battery pocket.
2
4
4
Fig.7
► 1 . Power cable 2. Jack 3. Adapter cable 4. Battery
pocket
1
3
Attaching the battery holder
You can hang the battery holder on your waist belt.
To prevent the battery holder from dropping acciden-
tally, attach a strap using the strap hole and secure it.
1.
Pull the power cable out of the upper hole in the
battery pocket and feed the jack through the lower hole
in the battery pocket and pull it through to the inside of
the jacket or vest.
2
3
5
Fig.8
► 1 . Power cable 2. Upper hole 3. Battery pocket
4. Jack 5. Lower hole
2. Attach the belt hook of the battery holder to your
waist belt. Connect the jack of the adapter cable to the
battery holder and connect the plug of the adapter cable
to the jack of the power cable.
1
3
Fig.9
► 1 . Belt hook 2. Battery holder 3. Waist belt
4. Adapter cable 5. Power cable
9 ENGLISH
1
4
2
5
4