Important Warnings - Di4 Gyro Laser 2500 Manual De Instrucciones

Tabla de contenido

Publicidad

IMPORTANT WARNINGS

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on
the product label.
The mains connection cable must not be tangled or wrapped around the product during use. Do not
pull on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and
contact an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only quali ed technical personnel
from the brand's O cial Technical support service may carry out repairs or procedures on the
device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only
an authorised technical support service centre may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or indus-
trial use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
incandescent objects (matches, cigarettes).
Never use the turbobrush to: Polish oors, suck (Liquids, wet or damp dust, hot ash, burning objects,
such as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass,
etc), our, cement, plaster, printer or photocopier toner, etc.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gyro laser 5000

Tabla de contenido