Important Warnings - Di4 Gyro Laser 2000 Manual De Instrucciones

supplied with the device and powered at very safety
voltage indicated on the appliance specifications plate.
Follow the DEVICE CHARGE instructions in order
to charge it. Follow the device BATTERY REMOVAL
instructions for removal of the batteries from the device.

IMPORTANT WARNINGS

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use. Do not
pull on the connection cord in order to unplug it.
Do not use, connect or disconnect the device to the mains with your hands or feet wet.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Unplug the product immediately from the mains in the event of any breakdown or damage and
contact an authorised Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from
the brand's Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on this product.
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
use. In case of misuse or tampering with the product, it will be out of warranty.
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
incandescent objects (matches, cigarettes).
Never use the turbobrush to: Polish floors, suck (Liquids, wet or damp dust, hot ash, burning objects,
such as cigarettes, matches, sharp and hard items, such us: razors, pins, thumbtacks, pieces of glass,
etc), flour, cement, plaster, printer or photocopier toner, etc.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
Escanee el código QR de la figura 1 para descargar e
instalar la aplicación " Di4 Connect".
FIG. 2
FIG. 3
Scan the QR code on the device or the QR code on the right
side,or manual input the QR code/Barcode to confirm the
device model,turn on the "Power switch" by following APP
instructions and go to the next step.
DI4 CONNECT
Open App, directly log in if you have a "WeBack"
account; if not, you can select "New User"
to sign up, and click on " " after login.
FIG. 4