Westfalia siarr 315118600001 Instrucciones De Montaje página 2

5408
PREPARATION
* Remove the 2 bolts under the bumper to facilitate fitting.
ASSEMBLY
* Fasten the right-hand arm B on the right-hand side-member
at points V and X with bolting kits V and X.
* Fasten the left-hand arm C on the left-hand side-member
at points V and X with bolting kits V and X.
* Fasten the coupling cross-member A to the right-hand and left-hand
arms at points W and Y with bolting kits W and Y (If necessary
insert the back plates between the arm B and cross-member A).
* Fit the head D on cross-member A at point Z with bolting kit Z.
* Fasten the ball joint on the head D at point U with bolting kit U.
FINISHING
* Tighten all of the nuts, bolts and screws to the torques indicated below.
* Refit the 2 bumper bolting bolts.
FASTENING KIT
2 HM10x35 screws
W
2 CS10 washers
47Nm 2 10-27 plain washers
2 HM10 nuts
2 HM10x25 screws
V
2 CS10 washers
47Nm
2 10-27 plain washers
DON'T USE IMPACT WRENCH
ASSEMBLY INSTRUCTIONS
4 HM10x25 screws
X
4 CS10 washers
47Nm
4 10-27 plain washers
4 M10 cage nuts
2 HM10x25 screws
Y
2 CS10 washers
47Nm
2 10-27 plain washers
2 HM12x60 screws
Z
2 CS12 washers
2 HM12 nuts
Type Type
SI053 Approval No.
Tow bar for
Peugeot 207 SW e24*94/20*00*0084
(Long Detachable Ball Join)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
If this tow bar is fitted in accordance with our recommendations it will give a complete-
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
315118600001
Max. Total Max. Total Max. Verti-
Authori. Weight Towable Weight cal load
1 758 kg 1 150 kg
Value
D
46 kg 6,82 kN