Makita GCU05 Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Overall length
(without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar length
Applicable saw chain type
(refer to the table below)
Sprocket
(91PX)
Sprocket
(80TXL)
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
Saw chain type
Number of drive links
Guide bar
Sprocket
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
*1
*2
Number of teeth
Pitch
Number of teeth
Pitch
Guide bar length
Cutting length
Part No.
Pitch
Gauge
Type
Number of teeth
Pitch
Guide bar length
Cutting length
Part No.
Pitch
Gauge
Type
Number of teeth
Pitch
GCU05
D.C. 36 V - 40 V max
6.3 - 7.4 kg (13.9 - 16.3 lbs)
400 mm (16")
56
400 mm (16")
361 mm (14-1/4")
165202-6
64
400 mm (16")
366 mm (14-3/8")
162A03-9
2 ENGLISH
GCU06
445 mm (17-1/2")
4.5 kg (9.9 lbs)
450 mm (18")
400 - 450 mm
(16" - 18")
91PX
80TXL
6
3/8"
7
0.325"
0 - 25.5 m/s
(0 - 1,530 m/min)
(0 - 5,020 ft/min)
3
260 cm (8.8 fl oz)
91PX
62
450 mm (18")
418 mm (16-1/2")
165390-9
3/8"
1.3 mm (0.050")
Sprocket nose bar
6
3/8"
80TXL
70
450 mm (18")
416 mm (16-3/8")
162B42-5
0.325"
1.1 mm (0.043")
Sprocket nose bar
7
0.325"