Festo Didactic EduTrainer 8023973 Manual Del Usuario página 21

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maximum permissible current loads for cables and devices must not be exceeded.
Always compare the current ratings of the device, the cable and the fuse.
In the event that these are not the same, use a separate upstream fuse in order to
provide appropriate overcurrent protection.
Use only connecting cables with safety plugs for electrical connections.
When laying connecting cables, make sure they are not kinked or pinched.
Do not lay cables over hot surfaces.
Hot surfaces are identified with a corresponding warning symbol.
Make sure that connecting cables are not subjected to continuous tensile loads.
Devices with an earth terminal must always be grounded.
If an earth terminal (green-yellow laboratory socket) is available, it must always be
connected to protective earth. Protective earth must always be connected first (before voltage),
and must always be disconnected last (after voltage).
Some devices have a high leakage current. These devices must be additionally grounded
with a protective earth conductor.
When replacing fuses, use specified fuses only with the correct current ratings and tripping
characteristics.
The device is not equipped with an integrated fuse unless specified otherwise in the technical data.
Always pull on the plug when disconnecting connecting cables; never pull the cable.
Hazard-free operation of the device is no longer possible in the case of:
Visible damage
Malfunction
Incorrect storage
Incorrect transport
Switch off the power supply immediately.
Protect the device against inadvertent restart.
Attention!
Improper repairs or modification may result in serious danger for the user.
Festo Didactic 8068435
21

Publicidad

Tabla de contenido
loading

Productos relacionados para Festo Didactic EduTrainer 8023973

Tabla de contenido