Makita CBU02 Manual De Instrucciones página 10

CAUTION:
When removing the portable power pack,
press the lock button while holding the handle firmly.
Fig.17
► 1. Handle 2. Lock button
3. Attach the cord to the cord holders as shown in
the figure.
1
2
1
Fig.18
► 1. Cord holder 2. Cord
4. Open the plug cover, then align the arrow mark on
the socket with that on the machine, and then insert the
socket into the plug all the way.
Fig.19
► 1. Plug cover 2. Socket
1
2
NOTICE:
Do not insert the socket forcibly. If
the socket cannot be inserted easily, it is not being
inserted correctly.
NOTICE:
When disconnecting the socket from
the plug, do not hold the cord but hold the socket.
Otherwise, the cord may be damaged and cause a
malfunction of the machine.
To remove the portable power pack, perform the instal-
lation procedure in reverse.
Indicating the remaining battery
capacity
Fig.20
► 1. Battery indicator 2. Check button
Press the check button to indicate the remaining battery
capacity.
Battery indicator status
On
1
NOTE: The indicator lamp for remaining battery
1
capacity is just for a reference. The actual battery
capacity may differ depending on the usage condi-
tions or ambient temperature.
NOTE: While the machine is in operation, the indica-
tor lamp does not light up even if you press the check
2
button.
NOTE: The lamp automatically goes off after a few
seconds.
10 ENGLISH
1
2
Off
Blinking
Remaining
battery
capacity
50% to 100%
20% to 50%
0% to 20%