Functional Description - Makita CBU02 Manual De Instrucciones

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before adjusting or checking function on the
machine.
Installing or removing portable
power pack
CAUTION:
Always switch off the machine
before installing or removing the portable power
pack.
CAUTION:
Hold the machine and the portable
power pack firmly when installing or removing
portable power pack. Failure to hold them firmly
may cause them to slip off your hands and result in
damage to the machine and portable power pack and
a personal injury.
CAUTION:
Make sure that the portable power
pack is securely installed to the machine. If not,
it may accidentally fall out of the machine, causing
injury to you or someone around you.
CAUTION:
Before operation, make sure that
the cord is securely attached to the cord holders
and the socket is inserted into the plug all the
way.
1. Pull out the cord to the direction as shown in the
figure. When pulling out the cord, be sure to set the cord
in the holders as shown in the figure.
Fig.14
► 1. Cord 2. Holder
2. Install the portable power pack to the machine as
shown in the figure.
Fig.15
► 1. Portable power pack
CAUTION:
gers or thumbs between the portable power pack
and the machine when installing the portable
power pack.
CAUTION:
pack is securely fixed to the machine. Otherwise,
the portable power pack may fall when you put on the
machine or use the machine, and cause an injury. If
you can see the red indicator as shown in the figure,
the portable power pack is not locked completely.
1
2
Fig.16
► 1. Red indicator
9 ENGLISH
Be careful not to pinch your fin-
Make sure that the portable power
1
1