Auto Defrost; Cleaning And Maintenance - Avanti MOTR14K3S-IS Manual De Instrucciones

Ocultar thumbs Ver también para MOTR14K3S-IS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: During defrosting, the oven will pause and sound beepto remind user
to turn the food over, after that, press

Auto Defrost

The defrosting power is adjusted automatically once the cooking time is
programmed.
1. In standby mode, press
2. Press the number pads to enter defrosting time. The longest time is 99
minutes and 59 seconds.
Start/Add 30 Sec
3. Press
NOTE: During defrosting, the oven will pause and sound beep to remind user
to turn the food over, after that, press
Exterior
The outside surface is pre-coated steel and plastic. Clean the outside with mild
soap and water; rinse and dry with a soft cloth. Do not use any type of household
or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to remove any spills or spatters.
Metal parts will be easier to maintain if wiped frequently with a damp cloth. Avoid
the use of spray and other harsh cleaners as they may stain, streak or dull the
door surface.
Control Panel
Care should be taken in cleaning the press control panel. If the control panel
becomes soiled, open the oven door before cleaning. Wipe the panel with a cloth
dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any
sort of chemical cleaners. Close door and press STOP/CANCEL.
Interior
Defrost
pad to start.

CLEANING AND MAINTENANCE

Start/Add 30 Sec
pad once.
Start/Add 30 Sec
25
pad to resume.
pad to resume.

Publicidad

Tabla de contenido
loading

Tabla de contenido