Bullard TXS Serie Manual De Instrucciones página 4

Ocultar thumbs Ver también para TXS Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Only use original Bullard batteries (P/N: XSBATT) and chargers
(P/N: XSCHARGER or P/N: XSUSBCHARGER) and refer to the
manufacturer's instructions for proper charging instructions. Retain
the original product literature for future reference. Contact your
distributor or visit www.bullard.com to find your nearest authorized
reseller for purchasing original Bullard batteries, chargers and other
replacement parts.
EXPLOSION HAZARD. Do not connect or disconnect the equipment
to any charger in an hazardous location.
Do not short circuit, crush, incinerate, or disassemble.
Risk of fire, explosion, or burns.
Do not attempt to disassemble the Bullard TXS Thermal Imager. If
the unit is not functioning properly, return it to the Bullard service
center for evaluation.
Battery Pack must be recycled or disposed of properly.
Bullard Center
2421 Fortune Drive
Lexington, KY 40509 • USA
877.BULLARD (285.5273)
Tel: +1.859.234.6616
Fax: +1.859.246.0243
4
SAFETY CONSIDERATIONS AND LIMITATIONS OF USE
WARNING
WARNING
WARNING
WARNING
Americas Operations
1898 Safety Way
Cynthiana, KY 41031 • USA
877.BULLARD (285.5273)
Tel: +1.859.234.6616
Fax: +1.859.234.8987
The Bullard TXS thermal imager is extremely sensitive to intense,
radiant heat sources. Never point the Bullard TXS thermal imager
at the sun or any other source of extreme radiant heat, as this may
damage the sensor.
Thermal Imaging is not a technology designed to replace current
firefighting tactics. Rather, it is a tool which allows the firefighter to
be more effective and to make better decisions. Firefighters cannot
stop using basic firefighting safety tactics. All firefighters should
receive proper training on: How thermal imagers work, their uses
and limitations, image interpretation, and safety considerations for
thermal imaging use.
Do not use solvents or paint thinners to clean the Bullard TXS
thermal images as the could permanently mark the surface or
degrade the protective properties of the casing. Do not intentionally
submerge the unit underwater or subject the unit to high pressure
water. Follow care instructions (See care instructions).
Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
Bullard GmbH
Dieselstrasse 8a
53424 Remagen • Germany
Tel: +49.2642.999980
Fax: +49.2642.9999829
w w w . b u l l a r d . c o m / t x s
BULLARD TXS
THERMAL IMAGER
INSTRUCTION MANUAL
WARNING
WARNING
WARNING
California Proposition 65
Bullard Asia Pacific 51 Changi
Business Park Central 2
#03-04 The Signature
Singapore 486066
Tel: +65.6745.0556
Fax: +65.6797.0299
WARNING
Bullard Technology Center
Darix Sàrl
Chemin du Closel 3
1020 Renens • Switzerland
Tel: +41.21.515.2910
60530013034C EN (1122)

Publicidad

Tabla de contenido
loading

Productos relacionados para Bullard TXS Serie

Tabla de contenido