Technical Data; Intended Use - BGS technic 7082 Instrucciones De Uso

Automatic Transmission Oil Exchange and Flushing

TECHNICAL DATA

Voltage source: 12 V (car battery)
Pump output:
Oil pressure gauge diameter: 70 mm (both oil pressure gauges)
Oil pressure display range: 0-150 psi (0-10 bar)
Fresh oil tank capacity: 30 litre
Old oil tank capacity:
Oil hose: length 126 x Ø 12.5 mm (1/2 inch) (red)
Oil hose: length 126 x Ø 12.5 mm (1/2 inch) (black)
all hoses with quick couplings (plug and socket)
Max. hose pressure: 300 psi (20 bar)

INTENDED USE

This automatic transmission oil exchange and flushing machine removes, cleans and replaces oils
and fluids from most automatic transmission types and versions, gearboxes, hydraulic torque gears,
gearbox coolers and gearbox cooler lines.
WARNING
During use, the fundamental safety precautions should be observed as these reduce the risk of
personal injury and property damage. Observe all instructions, safety instructions and precautionary
measures before use.
SAFETY INSTRUCTIONS AND PRECAUTIONARY MEASURES
• Keep the work area clear. Congested area facilitate personal injuries.
• Observe the circumstances at the work area. Do not use machines or electric tools in damp or
wet rooms. Do not expose them to rain. Keep the work area well illuminated. Do not use electric
tools in the vicinity of flammable gases or liquids.
• Keep children away. It is essential to keep children away from the work area. Do not allow them
handle machines, tools or extension cables.
• Store unused tools. Tools not used should be stored in a dry place so that they do not corrode.
Always store tools locked away and out of reach of children.
• Use the matching tool for the respective task. Do not attempt to carry out the work of a larger
industrial tool with a small tool or attachment by using force. This is because these tools only
serve the intended purposes. With their help, the work will be carried out better and safer and at
the correct speed. Do not modify these tools and use them only for their intended purpose.
• Wear the correct clothing. Do not wear loose-fitting clothing nor jewellery as they can get caught
in moving parts. We recommend that you wear protective, electrically non-conductive clothing
and non-slip footwear when working. Wear safety headgear that can also accommodate long
hair.
• Wear eye and ear protection. When working with chemical dusts and mists, always wear an
approved dust mask or respiratory protection mask.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Machine | with Adaptor Set
70 W
(both oil pressure gauges)
30 litre
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 7082
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed