Important Warnings; Set Up Before Use - UFESA Totalchef RK7 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

IMPORTANT WARNINGS

This appliance is designed for home use and should never be used for commercial or
industrial use under any circumstances. Any incorrect use or improper handling of the
product shall render the warranty null and void.
Check if the voltage indicated on the appliance corresponds to the local mains voltage
before you connect the appliance.
The mains connection cable must not be tangled or wrapped around the product during
use.
Do not use the device, or connect and disconnect to the supply mains with the hands and
/ or feet wet. Do not pull on the connection cord in order to unplug it or use it as a handle.
Never use any accessories of parts from other manufactures. Your guarantee will become
invalid if such accessories or parts have been used.
Thoroughly clean the parts that will come into contact with food before you use the
appliance for the first time.
Always put the main appliance on a flat, dry and clean surface.
Never let the appliance run unattended.
The Spatula is only used for moving the food out of the bowl. Don't use it while the blade
is running.
When processing hot food (for temperature above 60°C) don't touch the filler cup.
Unplug the product immediately from the mains in the event of any breakdown or damage
and contact an official technical support service. In order to prevent any risk of danger, do
not open the device. Only qualified technical personnel from the brand´s Official technical
support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings..
NSTALLATION
The bowl
The Maximum capacity of the bowl is 4.5 liters. Don't process the food more than 3 liters!
Caution
"Hot surface" logo marked on the bowl:
To indicate that the marked item can be hot and should not be touched without taking care!

Set up before use

Place the drive shaft correctly locked into the jug (See figure C). Insert the jug into the
31

Publicidad

Tabla de contenido
loading

Tabla de contenido