(En) English - WUBEN X2 Manual Del Usuario

(EN) English

Warnings
Please read user manual carefully before using the product.
Product will generate heat while working, please be cautious with that to avoid any
possible harm.
Please don't shine into eyes directly to avoid harm to eyes.
Please keep the product away from children.
Please don't disassemble the product or it will not be covered by WUBEN warranty policy.
Please don't throw the product into fire.
This is not a diving product, please don't use it underwater for a long time.
Operation
Reminder: The product is set to be locked by default when it leaves the factory. After
receiving the product, please click four times to complete the first unlock!
ON/OFF: Click the switch to turn on the flashlight, click again to turn off the flashlight.
1
The flashlight has a memory function of lighting brightness, and will not remember the
flashing mode and extremely bright mode.
Default Output Selections: In the power-on state, long press the switch to switch the
2
brightness of the flashlight cyclically: low - medium - high - low cyclically. Release the
switch in any gear to lock the brightness.
Quick Turbo: In any state, double-click the switch to enter the ultra-bright mode, After
3
entering the lighting gear, double-click to return, and double-click in other modes is
invalid.
Quick Low: In shutdown state, long press the switch to enter the Low mode.
4
Flash Modes: In any state, triple-click the switch to enter the strobe mode, triple-click
5
again to switch in flashing modes: SOS - strobe.
- 06 -