Power Cord; Handle Adjustment - Uline SANITAIRE H-10152 Manual De Instrucciones

4. Insert bag adapter clip on
bottom of bag collar into
bag adapter retainer.
(See Figure 4)

POWER CORD

Attach extension cord to power
cord and secure with cord lock
provided. (See Figure 6)

HANDLE ADJUSTMENT

1. Step on handle release located at the left rear side
of vacuum.
2. Move handle and adjust it to desired position.
3. Step on the handle release a second time to allow
the handle to lay flat for cleaning under low furniture.
PAGE 3 OF 21
ASSEMBLY CONTINUED
Figure 4
OPERATION
Figure 6
5. Push bag collar up and
forward so the locator lug
slides into slot. Turn cam
latch to lock bag onto rivet.
Attach bag spring to back
of the upper cord hook.
Attach chain to the two
zippers. (See Figure 5)
HEIGHT SETTINGS
WARNING! To prevent injury, keep loose
clothing, hair, fingers and all other parts of
body away from any moving part (such as the
revolving brush). Turn cleaner off and unplug
before changing the height.
1. With power cord unplugged, adjust base to highest
setting with six-position adjustment knob.
2. Plug in vacuum, step on power switch and turn on
vacuum. Lower setting one notch at a time until you
hear bristles touching the carpet. This should be a
noticeable sound change.
Recommended S etting
Position 1-2
Position 3-4
Position 5-6
CAUTION! With brush roll on, do not allow
vacuum to sit in one location for an extended
period of time, as damage to floor can result.
NOTE: When finished using vacuum, wrap cord
around cord wrap for storage. Store vacuum
indoors in a dry location in an area where it is
not likely to get damaged.
Figure 5
Carpet Height
Low pile
Medium pile
High pile
1022 IH-10152