CHANGING THE DUST BAG
1. Grasp top of bag and
release both zippers by
pulling down on dual zipper
connector. (See Figure 7)
2. Release bag cap by
grasping finger tabs and
rotating the cap toward
back of bag. (See Figure 8)
3. Support the top of the dirt
tube and pull the dust
bag collar forward.
(See Figure 9)
4. Place new dust bag collar
on the tabs of the dirt tube
interface. Rotate up until dirt
tube tabs fasten into holes
in dust bag collar.
(See Figure 10)
PAGE 4 OF 21
MAINTENANCE
Figure 7
Figure 8
Figure 9
Figure 10
5. Tuck bottom of dust bag
into the lower portion of the
outer bag. (See Figure 11)
6. Replace the bag cap and
pull up on the dual zipper
connector to secure the
back of the outer bag.
(See Figure 12)
Figure 11
Figure 12
1022 IH-10152