OPERATING ISSUE
Vacuum does not clean.
Vacuum is hard to push.
Vacuum is clogged.
Burning smell.
Dust leaking out of vacuum.
Belt is broken or worn.
Belt continues to break.
PAGE 7 OF 21
TROUBLESHOOTING CONTINUED
Dust bag may be full. Replace the dust bag if 2/3 or
more full.
Adjust carpet height setting to lower position.
Check for clogs that restrict airflow.
Check for worn or broken belt and replace if necessary.
Adjust carpet height setting to higher position.
Remove bottom metal plate. Check for clog in base
and/or brush roll.
Remove dust bag. Check for clog where dust bag
attaches to dust bag collar and where the dust bag
attaches to the dirt tube.
The belt may be damaged or something may be
caught in the brush roll.
Check brush roll and remove obstruction.
Replace belt.
Check to ensure paper bag collar is properly attached
inside cloth bag.
Check paper bag for tears.
Replace belt.
The brush roll should be positioned with the low side of
belt aligned within the belt groove.
1-800-295-5510
uline.com
RECOMMENDATIONS
1022 IH-10152