Kit Components - Watts 957-FS Serie Instrucciones De Instalación

Kit Components

All kits include the sensor activation module and power adapter
to enable the flood sensor. Retrofit kits also include the flood
sensor and related components. If any item is missing, speak
with your account representative.
A. Sensor activation module with an 8' 4-conductor electrical
cable, ground wire, and 4 attachment screws
C. 24V Power adapter
Requirements
• #2 Phillips screwdriver
• Wire stripper
• Suitable location within 8 feet of the flood sensor for
mounting the Cellular Gateway on a wall or structure
• 120VAC, 60Hz, GFI-protected electrical outlet
• Ground wire running from the Cellular Gateway to
the ground point
• Cellular network connection
• Internet browser
NOTICE
The connection kits are suitable for installation on the specified
valve series only.
B. Cellular Gateway with mounting tabs and screws
D. Flood sensor with mounting bolts (retrofit kit only)
NOTICE
When installing an air gap, attach the air gap brackets directly
onto the flood sensor.
2