Kit Components - Watts 009-FS Serie Instrucciones De Instalación

Kit Components

All kits include the sensor activation module and power adapter
to enable the flood sensor. Retrofit kits also include the flood
sensor and related components. If any item is missing, speak
with your account representative.
A. Sensor activation
module with an
8' 4-conductor
electrical cable,
ground wire, and
4 attachment
screws
C. Cellular Gateway
with mounting
tabs and screws
E. Included in retrofit kits:
• Sizes ½" to ¾" flood
sensor with captive screw
and deflector
• Sizes 1" to 1½" flood
sensor with 2 deflectors
(1" and 1¼" to 1½") and
2 mounting bolts
• Sizes 2" to 3" flood sensor
with deflector and 2 sets of
mounting bolts (larger bolts
for LF009 2½" to 3" only)
Requirements
• #2 Phillips screwdriver
• ⁄ " Allen wrench
3
16
• ½" Wrench
• Instrument with small tip to change DIP switch settings
• Wire stripper
• A suitable location within 8 feet of the flood sensor for
mounting the Cellular Gateway on a wall or structure,
plugging the power adapter into a GFI-protected electrical
outlet, and running a ground wire from the Cellular
Gateway to the ground point
• Cellular network connection
• Internet browser
The connection kits are suitable only for new or existing
installations of the specified valve assemblies.
B. Four deflectors
(For Series 009,
sizes ½" to 2",
with flood sensor)
D. 24V Power adapter
(requires a 120VAC, 60Hz,
GFI-protected electrical outlet)
Retrofit kit for sizes
2" to 3" (minus
Cellular Gateway)
2
NOTICE