Energeeks EG-AWG002 Guía De Instalación Rápida página 56

. In the app enter the password of your Wi-Fi and
press confirm.
- AP Mode
. In our APP "Energeeks 3.0", press the + button at
the top, and then "Alarma (wifi)".
. At the top click on "otros modos" and select
"conectarse a la red mediante un punto de acceso".
. Connect the alarm to the main electrical network
and turn on the switch under the connector, in the
application press continue.
. On the alarm panel, enter your administrator
password and press"Enter" to enter the main menu.
. Select Wi-Fi AP mode, and press 1 to activate it
. In the app press continue.
. Enter your Wi-Fi password and press confirm.
. As indicated by the application, when you press
continue, Wi-Fi connections will be accessed to
select the alarm as an access point, it is called
"SmartLife_xxxx", once you are connected to this
network go back to the app Energeeks 3.0 and the
installation will start automatically.
Note: If the connection process fails, reset the
alarm and the router, verify that the phone is
connected to the 2.4 GHz network, and try again.
If the problem continues consult your internet
service provider.
56