INSTALLATION
For the installation, follow the instructions in this manual. Drawings in the assembly section are for illustration purposes only
and may not reflect actual product. Not to scale.
RECOMMENDATIONS DURING THE INSTALLATION
- In order to heat the water in the pool, the Filter Pump must be running to circulate the water through the Pool Heater. It will
not start up if the water is not circulating.
- If a chlorinator or other equipment that produces chemicals is installed in the system, it must be installed after the Pool
Heater. This will help avoid a high level of chemicals, which can damage the metal part of the Pool Heater.
- Before connecting the unit, verify that the supply voltage matches the operating voltage of the Pool Heater.
- When connecting the plug to the wall socket, ensure the power plug is secure. If the plug is not secure, it may cause an
electric shock, over-heating or fire.
- Never pull out the power plug during operation. Otherwise, it may cause an electric shock or a fire due to over-heating.
- Heat pump equipotential bonding terminal
It is recommended to arrange for a qualified electrician to connect the heat pump to an equipotential bonding terminal using
a minimum 2.5mm
solid copper conductor.
2
USING THE POOL HEATER
- Switch on the filter pump. Check for leaks and verify that water is flowing from and to the swimming pool.
- Connect power to the heat pump and press the On/Off button on the control panel. The unit will start up.
- When first powered on, the Pool Heater will check the water flow in 30 seconds, then start running if the water flow is ok.
- The heat pump has a built-in, 3-minute start-up delay to protect the circuitry and avoid excessive contact wear. The unit will
restart automatically after this time delay expires.
- After a few minutes, check whether the air blowing out of the unit is cooler.
- When turning off the filter pump, the unit should also turn off automatically.
- Depending on the initial temperature of the water in the swimming pool and the air temperature, it may take some time to
heat the water to the desired temperature. A good swimming pool cover can dramatically reduce the required length of time.
6