Warranty Terms; Error Codes - Bestway 58748 Manual Del Propietário

MAINTENANCE
CAUTION: You must ensure the Pool Heater is unplugged before beginning the maintenance to avoid risk of injury or death.
- Please check the filtration system regularly. Sand and Filter cartridge must be kept clean and the air must be eliminated to
avoid low water flow, which could damage the Pool Heater and reduce the performance.
- If the Pool Heater is not in operation for a long time (especially during the winter season), all the water inside must be
discharged.
DISASSEMBLY
DRAINING
To drain the Pool Heater, consult the instructions inside the manual. Drawings in the assembly leaflet are for illustration
purposes only. May not reflect actual product. Not to scale.
STORAGE
Remove all accessories; be sure to clean and dry all before storing. If all the parts are not completely dry, mold may result.
We strongly recommend removing the Pool Heater when the environment temperature is below 10°C/50°F. Store the Pool
Heater in a dry place with a moderate temperature between 10°C/50°F and 38°C/100°F.
Keep away from heat sources and fire sources and storage of flammable and explosive materials.

WARRANTY TERMS

For information concerning warranty terms, visit our website at: www.bestwaycorp.com

ERROR CODES

Malfunction Code
Water temperature
sensor failure
Piping temperature
sensor failure
Ambient temperature
sensor failure
Too low or too high
ambient temperature
protection
Water flow sensor
does not detect
water flow.
440
Reason
Water temperature sensor doesn't work
P1
properly.
P3 Piping temperature doesn't work properly.
Ambient temperature sensor doesn't work
P5
properly.
1. Ambient temperature is out of operating
range: below 12°C over 43°C.
E0
2. Ambient temperature protection doesn't
work properly.
1. Insufficient or no water flow.
E3
2. Water flow sensor doesn't work properly.
For assistance, please visit the support section
of our website www.bestwaycorp.com
For assistance, please visit the support section
of our website www.bestwaycorp.com
For assistance, please visit the support section
of our website www.bestwaycorp.com
1. Wait the ambient temperature recover the
operation range.
2. For assistance, please visit the support section
of our website www.bestwaycorp.com.
1. Check that the filtration system is working.
2. For assistance, please visit the support section
of our website www.bestwaycorp.com
8
363
Solution