Assembly - Dyson pure hot+cool HP04 Manual De Instrucciones

Assembly

Use both hands to lift the
machine out of the box,
taking care to hold by the
base of the machine only.
Do not lift out by the
amplifier loop.
Slide the buttons down on both sides
of the shrouds.
The shrouds will release with the
glass HEPA filters attached.
Take the carbon filters out
of the box and remove the
protective packaging.
Attach both carbon filters to
the machine.
Position the shrouds onto the base
and push gently until they click
securely into place.
Place the remote control on the top
of the machine with the buttons
facing down.
Plug in and switch on.
9