Assembly/Disassembly - VALBERG CYCLONIC-S10 Instrucciones De Uso

B
Product usage

Assembly/Disassembly

Mounting the vacuum cleaner:
Attach the desired brush or crevice tool to the tube until it is firmly secured.
Floor brush/power brush only - Rotate the tube attached to the floor/power brush
clockwise until the brush release button is facing forward. Next, press down so that
the underside of the brush comes into full contact with the floor.
Push the tube into the handheld vacuum until it clicks into place.
OR
Push the desired brush or crevice tool directly onto the handheld vacuum.
Floor bristle brush – Use it to clean carpets or hard and smooth surfaces. Directly attach
•
the floor brush (or power brush, depending on the floor surface being cleaned), to the
handheld vacuum cleaner in order to be able to easily vacuum the stairs. The brush's
LED indicators are useful for poorly lit areas.
Power roller brush – Use it on surfaces that scratch easily, in addition to hard or smooth
•
surfaces, such as parquet flooring, to optimally remove dust.
• Crevice tool – Use the brush with or without the bristles to remove dirt from tight or
hard-to-reach corners.
Mini brush – Use the bristle brush to remove stubborn dirt from furniture, blinds, floors
•
and carpets. Use the soft felt brush to clean delicate surfaces.
Press the button on the mini brush and slide the brush up or down to use the bristled
or felt section of the brush.
Disassembly:
• Make sure the unit is switched off.
Detach the tube from the floor brush or handheld vacuum by pressing the appropriate
release button and pulling the two components apart.
Store the unit on the wall mount and the accessories in the vacuum cleaner packaging
or any other suitable container.
18 EN