Language Selection - Mitsubishi Electric Mr.Slim PSA-M KA Serie Manual De Instrucciones

8. Initial Setting
Main display
Full /Basic
B&W inversion Yes /No
Select:
Cursor Cursor
F1 F2 F3 F4
Navigating through the screens
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
8.2.3 Contrast•Brightness
<Button operation>
Initial setting menu
Basic setting
Display setting
Operation setting
Wi-Fi interface setting
Main menu:
Cursor
F1 F2 F3 F4
Display setting
Main display
Display details
Contrast• Brightness

Language selection

Setting display:
Cursor
F1 F2 F3 F4
Contrast Brightness
•
Brightness Lo /Mid/Hi
Light Dark
Main menu:
Low High Light Dark
F1 F2 F3 F4
Navigating through the screens
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
Select "B&W inversion" with the
[F1] or [F2] button, and select the
display mode "Yes" or "No" with
the [F3] or [F4] button, and press
the [SELECT] button. (The factory
setting is "No.")
Selecting "Yes" will invert the colors
of the display, turning white back-
ground to black and black charac-
ters to white as shown at left.
Select "Display setting" from the
Initial setting menu, and press the
[SELECT] button.
Move the cursor to
"Contrast•Brightness" with the
[F1] or [F2] button, and press the
[SELECT] button.
Adjust the brightness with the [F1] or
[F2] button.
Adjust the contrast with the [F3] or
[F4] button, and press the [MENU]
or [RETURN] button.
8.2.4 Language selection
Function description
The desired language can be set. The language options are English,
French, German, Spanish, Italian, Portuguese, Swedish, Russian,
Greek, Turkish, Dutch, Czech, Hungarian, and Polish.
<Button operation>
Initial setting menu
Basic setting
Display setting
Operation setting
Wi-Fi interface setting
Main menu:
Cursor
F1 F2 F3 F4
Display setting
Main display
Display details
Contrast •Brightness
Language selection
Setting display:
Cursor
F1 F2 F3 F4
Language selection
English Français
Español Italiano
Português Ελληνικά
Türkçe Svenska
Select:
Cursor Cursor
F1 F2 F3 F4
Language selection
Deutsch Nederlands
Русский Čeština
Magyar Polski
Select:
Cursor Cursor
F1 F2 F3 F4
Language selection
English Français
Español Italiano
Português Ελληνικά
Türkçe Svenska
Changes saved
Main menu:
Navigating through the screens
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
Select "Display setting" from the
Initial setting menu, and press the
[SELECT] button.
Move the cursor to "Language se-
lection" with the [F1] or [F2] button,
and press the [SELECT] button.
Move the cursor to the language
you desire with the [F1] through
[F4] buttons, and press the
[SELECT] button to save the
setting.
When the power is on for the first
time, the Language selection
screen will be displayed. Select
a desired language. The system
will not start-up without language
selection.
A screen will appear that indicates
the setting has been saved.
en
21