Attaching The Blade - Bosch GKS18V-22 Instrucciones De Funcionamiento Y Seguridad

Disconnect battery pack from tool before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of
starting the tool accidentally.
Inserting and Releasing Battery Pack
(Fig. 2)
Use only Bosch or AMP-
Share batteries recommend-
ed in the battery/charger list, included with
your tool. Using other types of batteries may
result in personal injury or property damage.
Slide charged Battery Pack 19 into the housing
until the battery pack locks into position.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from complete-
ly falling out of the handle, should it become
loose due to vibration.
To remove the Battery Pack 19, press the Bat-
tery Pack Release Button 20 and slide the bat-
tery pack forward.
Press the Battery Pack Release Button 20 again
and slide the battery pack completely out of tool
housing.
Fig. 2
(28)
160992A86P GKS18V-22 202210 A5.indd 11
Saw Assembly
(14)
(28)
(25)
(26)
a
b
(27)

Attaching the Blade

(Fig. 2)
Use only 6-1/2" blade. Use
only blade rated 5000 rpm
or greater. Using blade not designed for the saw
may result in serious personal injury and prop-
erty damage.
1. Press and hold the Shaft Lock Button 4. Turn
Blade Stud 27 with provided Wrench 28 in
the direction a and remove Blade Stud 27 and
Outer Washer 26. Note: the wrench is stored
near the battery compartment.
2. Make sure the saw teeth and arrow on the
blade point in the same direction as the ar-
row on the lower guard.
3. Retract the Lower Guard 14 all the way up
into the upper guard. While retracting the
lower guard, check operation and condition
of the LOWER GUARD SPRING.
(20)
(24) (23)
(4)
11
9/29/22 9:47 AM