GYS WF 35 Manual De Uso página 115

Settings
Display mode
- Easy: simplified display suitable for the vast majority of users.
- Expert: comprehensive display suitable for more experienced welders. Allows you to adjust the durations of the
different phases in the welding cycle.
Language
Choice of the interface language (French, English, German, etc).
Units of measurement
Choice of measurement units: International (SI) or Imperial (USA).
Name of materials
European standard (EN) or American standard (AWS).
Luminosity
Adjusts the brightness of the interface screen (setting from 1 (dark) to 10 (very bright)).
System
Device name:
Device name information and customisation options.
Clock:
Setting the time, date and format (AM/PM).
Cooling unit (only for machines equipped with a cooling system)
- OFF: the cooling unit is deactivated.
- ON: the cooling unit is permanently active.
- AUTO: automatic operation (activates during welding and deactivates 10 minutes after the end of welding)
PURGE : function specifically dedicated to the purging of the cooling unit or filling of the hoses, the protections
are disabled (see the general instructions for safe purging of your product).
Information
Configuration data of the product's system components:
- Model
- Serial number
- Device name
- Software version
Press push-button no. 2:
Exporting the machine configuration to the USB stick (not supplied)
Productivity
Product usage data :
- Ignition time
- Welding time
- etc.
Reset
Resets the product settings:
- Partial: defaults the values of the current welding process.
- Total: all the machine's configuration will be reset to the factory settings.
15