Mounting Or Removing Of Arm Supports - Vermeiren Eclips XXL Manual De Instrucciones

3.3

Mounting or removing of arm supports

CAUTION
 Keep fingers, buckles and clothes away from the bottom side of the arm support.
 Check that the arm supports are firmly mounted before using your wheelchair.
The arm supports of the wheelchair can be mounted by following instructions.
1. Mount the rear tube of the arm supports in tube hood . (Fig A)
2. Make sure the arm support is mounted very well.
3. Fold the arm support forward.
4. Pull the lever  on tube hood  upwards. (Fig B)
5. Click the front tube of the arm support  in tube hood . (Fig B)
A
To open and remove the arm support:
1. Pull lever  and pull the front of the arm support  upwards. (Fig C)
2. Fold the arm support backwards.
3. To remove the arm support, pull the rear of the arm support from tube hood . (Fig D)
C
Risk of injuries
7
EN
Eclips XXL
2023-01
Using your wheelchair
NL
B
D