Scott SOLACE GRAVEL eRIDE 30 Manual página 24

Error code
ERR 49C DRV SENS
ERR 49D DRV SENS
ERR 49E DRV SENS
ERR 49F DRV SENS
ERR 4A0 DRV COMM
ERR 4A1 DRV COMM
ERR 4A2 DRV COMM
ERR 4A3 DRV SW
ERR 4A4 DRV HW
ERR 4A5 DRV SW
ERR 4A6 BATT COMM
ERR 4A7 DRV SW
ERR 4A8 SPD SENS
ERR 4A9 DRV SW
ERR 4AA DRV SW
WRN 4AB DRV SENS
ERR 4AD DRV SW
ERR 4AE DRV SW
ERR 4AF DRV SW
ERR 4B0 DRV HW
ERR 4C8 DRV SW
ERR 4C9 DRV SW
ERR 4CA DRV SW
ERR 4CB DRV SW
Cause
Torquesensor error
CAN-Bus communication
error
Microcontroller elec-
tronics error
Cadence-sensor error
Torquesensor error
Battery communication
error
General software error
Speedsensor error
General software error
Cadence-sensor error
Drive Unit control error
Cadence-sensor error
Drive Unit mechanical
error
General software error
Corrective measures
Restart the system and avoid
unintended use. Contact your
TQ dealer if the error still occurs.
Check the charging port for
dirt. Restart the system. Contact
your TQ dealer if the error still
occurs.
Restart the system. Contact
your TQ dealer if the error still
occurs.
Check the distance between
magnet and Speedsensor or
check for tampering.
Restart the system. Contact
your TQ dealer if the error still
occurs.
Check if anything is stuck
or wedged in the chainring.
Contact your TQ dealer if the
error still occurs.
Restart the system. Contact
your TQ dealer if the error still
occurs.
EN - 23